Original Mean Well PLP-60-24 (MW)
Product Description
PLP-60-24
Product Pictures
Here is the detailed info for my Original Mean Well PLP-60-24 (MW). Hope you like it.
Product Information
Features :
- Universal AC input / Full range (up to 305VAC)
- Built-in active PFC function
- High efficiency up to89%
- Protections: Short circuit /Over current /Over voltage /Over temperature
- Cooling by free air convection
- Fully encapsulated with IP67 level
- Fully isolated plastic case
- Class two power unit, no FG
- Class 2 power unit
- Suitable for LED lighting and moving sign applications
- Compliance to worldwide safety regulations for lighting
- Suitable for dry / damp / wet locations
- 5 years warranty
- It's for MEAN WELL PLP-60-24
| MODEL | PLP-60-24( MEAN WELL PLP-60-24 ) | |
| OUTPUT | DC VOLTAGE | 24V |
| CONSTANT CURRENT REGION Note.5 | 18 ~ 24V | |
| RATED CURRENT | 2.5A | |
| CURRENT RANGE | 0 ~ 2.5A | |
| RATED POWER | 60W | |
| RIPPLE & NOISE (max.) Note.2 | 4.5Vp-p | |
| CURRENT ADJ. RANGE | 1.875 ~ 2.5A | |
| VOLTAGE TOLERANCE Note.3 | ±10% | |
| LINE REGULATION | ±3.0% | |
| LOAD REGULATION | ±5.0% | |
| SETUP TIME | 1000ms / 230VAC 2000ms / 115VAC at full load | |
| INPUT | VOLTAGE RANGE Note.4 | 90 ~ 264VAC |
| FREQUENCY RANGE | 47 ~ 63Hz | |
| POWER FACTOR | PF>0.9/at 75~100% load, 115VAC/230VAC | |
| EFFICIENCY (Typ.) | 88% | |
| AC CURRENT | 0.8A/115VAC 0.4A/230VAC | |
| INRUSH CURRENT(Typ.) | COLD START 35A(twidth=55µs measured at 50% lpeak ) at 230VAC | |
| LEAKAGE CURRENT | Less than 0.75mA / 240VAC | |
| PROTECTION | OVER CURRENT Note.5 | 100~ 110% |
| Protection type: Constant current limiting, recovers automatically after fault condition is removed | ||
| SHORT CIRCUIT | Protection type: Hiccup mode, recovers automatically after fault condition is removed. | |
| OVER VOLTAGE | 28 ~ 35V | |
| Protection type : Shut down o/p voltage, re-power on to recover | ||
| ENVIRONMENT | WORKING TEMP. | -30 ~ +70°C (Refer to "Derating Curve") |
| WORKING HUMIDITY | 20 ~ 95% RH non-condensing | |
| STORAGE TEMP., HUMIDITY | -40 ~ +80°C , 10 ~ 95% RH | |
| TEMP. COEFFICIENT | ±0.03%/°C (0~50°C) | |
| VIBRATION | 10 ~ 500Hz, 2G 12min./1cycle, period for 72min. each along X, Y, Z axes | |
| SAFETY & EMC | SAFETY STANDARDS | UL8750, TUV EN61347-1, EN61347-2-13, CSAC22.2 No. 250.0-08(except for 48V) approved ; design refer to UL60950-1 |
| WITHSTAND VOLTAGE | I/P-O/P:3.75KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC | |
| ISOLATION RESISTANCE | I/P-O/P, I/P-FG, O/P-FG: 100M Ohms/500VDC / 25°C/ 70% RH | |
| EMC EMISSION | Compliance to EN55015, EN61000-3-2 Class C ( larger than 75% load) ; EN61000-3-3 | |
| EMC IMMUNITY | Compliance to EN61000-4-2,3,4,5,6,8,11; EEN55024, EN61547, light industry level, criteria A | |
| OTHERS | MTBF | 583.3K hrs min. MIL-HDBK-217F (25°C ) |
| DIMENSION | 101.6*50.8*29.6mm (L*W*H) | |
| PACKING | 0.16Kg; 96pcs/16.4Kg/0.89CUFT | |
| NOTE | 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25°C of ambient temperature. | |
| 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12” twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. | ||
| 3. Tolerance: includes set up tolerance, line regulation and load regulation. | ||
| 4. Derating may be needed under low input voltages. Please check the static characteristics for more details. | ||
| 5. Please refer to "DRIVING METHODS OF LED MODULE". | ||
| 6. Heat sink HS1, HS2 can not be shorted | ||
| 7. Heat sink HS1 must have safety isolation distance with system case. | ||
| 8. The Power Supply is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again. | ||
| 9. Direct connecting to LEDs is suggested, but is not suitable for using additional drivers. | ||
Certificate
Storage and Packing
Shipping
MEAN WELL Other Series
Why Choose Us ???
A Fast Delivery + Satisfied Customer Service Is Our NO.1 Priority!
1. Our goal is to provide you the right product and make you satisfied, so please don’t hesitate to contact us via tel or mail.
2. We shall find for you the cheapest shipping term and show you the freight and shipping time. Regarding to the urgent order, a quickest shipping term and freight will be advised to you for consideration.
3. The stock info will be informed before your order, to make everything under control.
4. Price could be negotiated for more and large quantity.
5. It's all for MEAN WELL PLP-60-24.
Shipping & Duties
Usually, shipping will be arranged within 2-3 Days upon payment or deposit, from Monday to Saturday only.
Payment
To assure you the maximum comfort and satisfaction, Currently, you can pay via T/T, L/C, WESTERN UNION, PAYPAL or through Visa, MasterCard via Ali Express Escrow. More payment options will be added in the near future.
After-sale service
All of the products we sell are with a certain time warranty, during the warranty, anything wrong with it, like no working an unstable output voltage or current, damaged, my corporation will be responsible to fix it well for free and re-send it to the clients, But, the delivery cost should be paid by purchaser himself.
We will be very glad to provide the assistance during your installation and application at any time.
Contact Us
Your inquiry and mail will be quickly responded. Suppose you have no ideas on choosing the right power supply, please do not hesitate to contact us.
We will always be here and try our best to provide you our best service !
For samples, you can go to our Aliexpress to buy it too. It is easier to place the order, but have to pay 5% ( charging cost ) to Alibaba.
Product Categories : Mean Well Led Driver / Led Power Supply > PLP / HLP series Mean Well Led Driver
