MEAN WELL PPS-200-27 200W 27Vdc
Product Description
MEAN WELL PPS-200-27
Product Pictures
Here is the detailed info for my MEAN WELL PPS-200-27 200W 27Vdc . Hope you like it.
Product Information
Features :
- Universal AC input / Full range (up to 305VAC)
- Built-in active PFC function
- High efficiency up to90%
- Protections: Short circuit /Overload /Over voltage /Over temperature
- PWM control and regulated
- High power density 9.78W/inch
- Built-in remote sense function
- ZVS technology to reduce power dissipation
- Free air convection for 150W and 200W with 20.5 CFM forced air
- 3 years warranty
- It's for MEAN WELL PPS-200-27
| MODEL | PPS-200-27 | |
| OUTPUT | DC VOLTAGE | 27V |
| RATED CURRENT | 7.4A | |
| CURRENT RANGE (convection) | 0 ~ 5.56A | |
| CURRENT RANGE (20.5CFM FAN) | 0 ~ 7.4A | |
| RATED POWER (convection) | 150W | |
| RATED POWER (20.5CFM FAN) | 199.8W | |
| RIPPLE & NOISE (max.) Note.2 | 150mVp-p | |
| VOLTAGE ADJ. RANGE | 24.3 ~ 30V | |
| VOLTAGE TOLERANCE Note.3 | ±2.0% | |
| LINE REGULATION | ±0.5% | |
| LOAD REGULATION | ±1.0% | |
| SETUP, RISE TIME | 1200ms, 60ms/230VAC 2500ms, 60ms/115VAC at full load | |
| HOLD UP TIME (Typ.) | 11ms/230VAC/115VAC at full load | |
| INPUT | VOLTAGE RANGE | 90 ~ 264VAC 127 ~370VDC |
| FREQUENCY RANGE | 47 ~ 63Hz | |
| POWER FACTOR (Typ.) | PF>0.93/230VAC PF>0.98/115VAC at full load | |
| EFFICIENCY (Typ.) | 89% | |
| AC CURRENT (Typ.) | 2.2A/115VAC 1.2A/230VAC | |
| INRUSH CURRENT (Typ.) | COLD START 70A/230VAC | |
| LEAKAGE CURRENT | <2mA / 240VAC | |
| PROTECTION | OVER LOAD | 105 ~ 135% rated output power |
| Protection type : Hiccup mode, recovers automatically after fault condition is removed | ||
| OVER VOLTAGE | 31.05 ~ 36.45V | |
| Protection type : Hiccup mode, recovers automatically after fault condition is removed | ||
| OVER TEMPERATURE | 110°C±5°C(TSW1) detect on heatsink of power transistor | |
| Protection type : Shut down o/p voltage, recovers automatically after temperature goes down | ||
| ENVIRONMENT | WORKING TEMP. | -20~+70°C (Refer to derating curve) |
| WORKING HUMIDITY | 20~90% RH non-condensing | |
| STORAGE TEMP., HUMIDITY | -40~+85°C, 10~95%RH | |
| TEMP. COEFFICIENT | ±0.05%/°C (0~50°C) | |
| VIBRATION | 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes | |
| SAFETY&EMC | SAFETY STANDARDS | UL60950-1, TUV EN60950-1 approved |
| WITHSTAND VOLTAGE | I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC | |
| ISOLATION RESISTANCE | I/P-O/P, I/P-FG, O/P-FG:100MOhms/500VDC/25°C/70%RH | |
| EMC EMISSION | Compliance to EN55022 (CISPR22) Class B, EN61000-3-2,-3 | |
| EMC IMMUNITY | Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, light industry level, criteria A | |
| OTHERS | MTBF | 108.4Khrs min. MIL-HDBK-217F (25°C) |
| DIMENSION | 127*76.2*34.6mm (L*W*H) | |
| PACKING | 0.37Kg; 36pcs/14.3Kg/0.79CUFT | |
| NOTE | 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25°C of ambient temperature. | |
| 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. | ||
| 3. Tolerance: includes set up tolerance, line regulation and load regulation. | ||
| 4. The Power Supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. | ||
| 5. Heat Sink HS1,HS2 can not be shorted. | ||
| 6. Length of set up time is measured at cold first start. Turning ON/OFF the power supply very quickly may lead to increase of the set up time. | ||
Certificate
Storage and Packing
Shipping
MEAN WELL Other Series
Why Choose Us ???
A Fast Delivery + Satisfied Customer Service Is Our NO.1 Priority!
1. Our goal is to provide you the right product and make you satisfied, so please don’t hesitate to contact us via tel or mail.
2. We shall find for you the cheapest shipping term and show you the freight and shipping time. Regarding to the urgent order, a quickest shipping term and freight will be advised to you for consideration.
3. The stock info will be informed before your order, to make everything under control.
4. Price could be negotiated for more and large quantity.
5. Original MEAN WELL PPS-200-27
Shipping & Duties
Usually, shipping will be arranged within 2-3 Days upon payment or deposit, from Monday to Saturday only.
Payment
To assure you the maximum comfort and satisfaction, Currently, you can pay via T/T, L/C, WESTERN UNION, PAYPAL or through Visa, MasterCard via Ali Express Escrow. More payment options will be added in the near future.
After-sale service
All of the products we sell are with a certain time warranty, during the warranty, anything wrong with it, like no working an unstable output voltage or current, damaged, my corporation will be responsible to fix it well for free and re-send it to the clients, But, the delivery cost should be paid by purchaser himself.
We will be very glad to provide the assistance during your installation and application at any time.
Contact Us
Your inquiry and mail will be quickly responded. Suppose you have no ideas on choosing the right power supply, please do not hesitate to contact us.
We will always be here and try our best to provide you our best service !
For samples, you can go to our Aliexpress to buy it too. It is easier to place the order, but have to pay 5% ( charging cost ) to Alibaba.
Product Categories : Mean Well Open Frame Power Supply 5W ~ 400W > NFM series medical 5W ~ 20W
