MEAN WELL PSC-60A with battery charger 13.8VDC output 60W MW UPS power supply
Product Description
PSC-60A
Product Pictures
Here is the detailed info for my MEAN WELL PSC-60A with battery charger 13.8VDC output 60W MW UPS Power Supply. Hope you like it.
Product Information
Features :
- Universal AC input / Full range
- High efficiency up to84%
- Protections: Short circuit /Overload /Over voltage
- Cooling by free air convection
- Battery low protection / Battery reverse polarity protection by fuse
- Alarm signal for AC OK and Battery reverse low
- 100% full load burn-in test
- 2 years warranty
- It's for Mean Well UPS power supply
| MODEL | PSC-60A( UPS power supply ) | ||
| OUTPUT | OUTPUT NUMBER | CH1 | CH2 |
| DC VOLTAGE | 13.8V | 13.8V | |
| RATED CURRENT | 2.8A | 1.5A | |
| CURRENT RANGE | 0 ~ 4.3A | -------- | |
| RATED POWER | 59.34W | ||
| RIPPLE & NOISE (max.) Note.2 | 120mVp-p | -------- | |
| VOLTAGE ADJ. RANGE | CH1: 12 ~ 15V | ||
| VOLTAGE TOLERANCE Note.3 | ±1.0% | -------- | |
| LINE REGULATION | ±0.5% | -------- | |
| LOAD REGULATION | ±0.5% | -------- | |
| SETUP, RISE TIME | 800ms, 50ms/230VAC 1600ms, 50ms/115VAC at full load | ||
| HOLD UP TIME (Typ.) | 50ms/230VAC 10ms/115VAC at full load | ||
| INPUT | VOLTAGE RANGE | 90 ~ 264VAC 127 ~ 370VDC | |
| FREQUENCY RANGE | 47 ~ 63Hz | ||
| EFFICIENCY (Typ.) | 84% | ||
| AC CURRENT (Typ.) | 1.6A/115VAC 1A/230VAC | ||
| INRUSH CURRENT(Typ.) | COLD START 30A/115VAC 60A/230VAC | ||
| LEAKAGE CURRENT | Less than 1mA /240VAC | ||
| PROTECTION | OVERLOAD | 105 ~ 150% rated output power | |
| Protection type : Hiccup mode, recovers automatically after fault condition is removed | |||
| OVER VOLTAGE | CH1:14.49 ~ 18.63V | ||
| Protection type : Hiccup mode, recovers automatically after fault condition is removed | |||
| BATTERY LOW | 10.5V± 0.5V | ||
| FUNCTION | AC OK | TTL open collector output, ON : AC OK ; OFF : AC Fail ; Ice : max. 30mA at 50VDC | |
| BATTERY LOW | TTL open collector output, ON: Battery Low ; OFF : Battery OK ; Ice : max. 30mA at 50VDC | ||
| Battery low voltage : < 11V | |||
| ENVIRONMENT | WORKING TEMP. | -20 ~ +70°C (Refer to derating curve) | |
| WORKING HUMIDITY | 20 ~ 90% RH non-condensing | ||
| STORAGE TEMP., HUMIDITY | -20 ~ +85°C , 10 ~ 95% RH | ||
| TEMP. COEFFICIENT | ±0.03%/°C (0~50°C) on CH1 output | ||
| VIBRATION | 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes | ||
| SAFETY & EMC (Note 4) | SAFETY STANDARDS | UL60950-1, TUV EN60950-1 approved | |
| WITHSTAND VOLTAGE | I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC | ||
| ISOLATION RESISTANCE | I/P-O/P, I/P-FG, O/P-FG: 100M Ohms / 500VDC / 25°C/ 70% RH | ||
| EMC EMISSION | Compliance to EN55022 (CISPR22) Class B, EN61000-3-2,-3 | ||
| EMC IMMUNITY | Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, light industry level, criteria A | ||
| OTHERS | MTBF | 589.7K hrs min. MIL-HDBK-217F (25°C ) | |
| DIMENSION | PCB:101.6*50.8*29mm (L*W*H) ; | ||
| with optional CASE:103.4*62*37mm (L*W*H) | |||
| PACKING | PCB:0.13Kg; 96pcs/13.5Kg/0.89CUFT ; | ||
| with optional CASE:0.29Kg; 45pcs/14Kg/0.67CUFT | |||
| NOTE | 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25°C of ambient temperature. | ||
| 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12” twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. | |||
| 3. Tolerance: includes set up tolerance, line regulation and load regulation. | |||
| 4. The power supply is considered as a component that will be operated in combination with final equipment. The final equipment must be re-confirmed that it still meets EMC directives. | |||
| 5. Length of set up time is measured at cold first start. Turning ON/OFF the power supply may lead to increase of the set up time. | |||
| 6. Heat sink HS1,HS2 can not be shorted. | |||
| 7. Heat sink HS1 must have safety isolation distance with system case. | |||
Certificate
Storage and Packing
Shipping
MEAN WELL Other Series
Why Choose Us ???
A Fast Delivery + Satisfied Customer Service Is Our NO.1 Priority!
1. Our goal is to provide you the right product and make you satisfied, so please don’t hesitate to contact us via tel or mail.
2. We shall find for you the cheapest shipping term and show you the freight and shipping time. Regarding to the urgent order, a quickest shipping term and freight will be advised to you for consideration.
3. The stock info will be informed before your order, to make everything under control.
4. Price could be negotiated for more and large quantity.
5. It's all for Mean Well UPS power supply.
Shipping & Duties
Usually, shipping will be arranged within 2-3 Days upon payment or deposit, from Monday to Saturday only.
Payment
To assure you the maximum comfort and satisfaction, Currently, you can pay via T/T, L/C, WESTERN UNION, PAYPAL or through Visa, MasterCard via Ali Express Escrow. More payment options will be added in the near future.
After-sale service
All of the products we sell are with a certain time warranty, during the warranty, anything wrong with it, like no working an unstable output voltage or current, damaged, my corporation will be responsible to fix it well for free and re-send it to the clients, But, the delivery cost should be paid by purchaser himself.
We will be very glad to provide the assistance during your installation and application at any time.
Contact Us
Your inquiry and mail will be quickly responded. Suppose you have no ideas on choosing the right power supply, please do not hesitate to contact us.
We will always be here and try our best to provide you our best service !
For samples, you can go to our Aliexpress to buy it too. It is easier to place the order, but have to pay 5% ( charging cost ) to Alibaba.
Product Categories : Mean Well Open Frame Power Supply 5W ~ 400W > NFM series medical 5W ~ 20W
