Original mean well ul led driver 12v 160W Single Output Medical Type RPS-160-12
Product Description
RPS-160-12
Product Pictures
Here is the detailed info for my Original Mean Well ul Led Driver 12v 160W Single Output Medical Type RPS-160-12. Hope you like it.
Product Information
Features :
- Universal AC input / Full range
- High efficiency up to 87%
- Protections: Short circuit /Overload /Over voltage/ Over temperature
- NO load power consumption<0.75W
- medical safety approved
- 3 years warranty
- It's for original mean well ul led driver 12v
| MODEL | RPS-160-12 | |
| OUTPUT | DC VOLTAGE | 12V |
| RATED CURRENT | 12.9A | |
| CURRENT RANGE | 0 ~ 12.9A | |
| RATED POWER | 112.2W | |
| PEAK LOAD(23.5CFM) | 159.8W | |
| RIPPLE & NOISE (max.) Note.2 | 100mVp-p | |
| VOLTAGE ADJ. RANGE | 10.8 ~ 13.2V | |
| VOLTAGE TOLERANCE Note.3 | ±3.0 % | |
| LINE REGULATION | ±0.5 % | |
| LOAD REGULATION | ±1.0 % | |
| SETUP, RISE TIME | 1800ms, 30ms/230VAC 3500ms , 30ms/115VAC at ful l load | |
| HOLD UP TIME (Typ.) | 16ms/230VAC 20ms/115VAC at full load | |
| INPUT | VOLTAGE RANGE | 90 ~ 264VAC 127 ~ 370VDC |
| FREQUENCY RANGE | 47 ~ 63Hz | |
| EFFICIENCY (Typ.) | 87% | |
| AC CURRENT (Typ.) | 2A/115VAC 1.1A/230VAC | |
| INRUSH CURRENT(Typ.) | COLD START 25A/115VAC 50A/230VAC | |
| LEAKAGE CURRENT Note.7 | Earth leakage current less than 200µA / 264VAC, Touch current less than 100µA/264VAC | |
| PROTECTION | OVERLOAD | 105 ~ 135% rated output power |
| Protection type : Hiccup mode, recovers automatically after fault condition is removed | ||
| OVER VOLTAGE | 13.8 ~ 16.2V | |
| Protection type : Shut down o/p voltage, re-power on to recover | ||
| ENVIRONMENT | WORKING TEMP. | -20~ +70°C (Refer to derating curve) |
| WORKING HUMIDITY | 20 ~ 90% RH non-condensing | |
| STORAGE TEMP., HUMIDITY | -40 ~ +85°C , 10 ~ 95% RH | |
| TEMP. COEFFICIENT | ±0.03%/°C (0 ~ 45°C) | |
| VIBRATION | 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes | |
| SAFETY & EMC (Note 4) | SAFETY STANDARDS | ANSI/AAMI ES60601-1, TUV EN60601-1, IEC60601-1 approved |
| WITHSTAND VOLTAGE | I/P-O/P:4KVAC I/P-FG:2KVAC O/P-FG:1.5KVAC | |
| ISOLATION RESISTANCE | I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25°C/ 70% RH | |
| EMC EMISSION | Compliance to EN55011 (CISPR11), EN55022 (CISPR22) Class B, EN61000-3-2,-3 | |
| EMC IMMUNITY | Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, EN60601-1-2,EN61000-6-2, EN61204-3, heavy industry level, EN61204-3 medical level, criteria A | |
| OTHERS | MTBF | 230.5K hrs min. MIL-HDBK-217F (25°C ) |
| DIMENSION | 127*76.2*34.6mm (L*W*H) | |
| PACKING | 0.32Kg; 36pcs/12.5Kg/0.79CUFT | |
| NOTE | 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25°C of ambient temperature. | |
| 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12” twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. | ||
| 3. Tolerance: includes set up tolerance, line regulation and load regulation. | ||
| 4. The Power Supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directive. | ||
| 5. Length of set up time is measured at cold first start. Turning ON/OFF the power supply may lead to increase of the set up time. | ||
| 6. Heat Sink HS1,HS2 can not be shorted. | ||
| 7. Touch current was measured from primary input to DC output. | ||
| 8. Suitable for BF application with appropriate system consideration | ||
Certificate
Storage and Packing
Shipping
MEAN WELL Other Series
Why Choose Us ???
A Fast Delivery + Satisfied Customer Service Is Our NO.1 Priority!
1. Our goal is to provide you the right product and make you satisfied, so please don’t hesitate to contact us via tel or mail.
2. We shall find for you the cheapest shipping term and show you the freight and shipping time. Regarding to the urgent order, a quickest shipping term and freight will be advised to you for consideration.
3. The stock info will be informed before your order, to make everything under control.
4. Price could be negotiated for more and large quantity.
5. Original mean well ul led driver 12v.
Shipping & Duties
Usually, shipping will be arranged within 2-3 Days upon payment or deposit, from Monday to Saturday only.
Payment
To assure you the maximum comfort and satisfaction, Currently, you can pay via T/T, L/C, WESTERN UNION, PAYPAL or through Visa, MasterCard via Ali Express Escrow. More payment options will be added in the near future.
After-sale service
All of the products we sell are with a certain time warranty, during the warranty, anything wrong with it, like no working an unstable output voltage or current, damaged, my corporation will be responsible to fix it well for free and re-send it to the clients, But, the delivery cost should be paid by purchaser himself.
We will be very glad to provide the assistance during your installation and application at any time.
Contact Us
Your inquiry and mail will be quickly responded. Suppose you have no ideas on choosing the right power supply, please do not hesitate to contact us.
We will always be here and try our best to provide you our best service !
Product Categories : Mean Well Open Frame Power Supply 5W ~ 400W > MPS / RPS series medical power supply 30W ~ 400W
